☆ 1、如有部分內容理解不透或消化不好，可免費在以后培訓班中重聽；
      ☆ 2、在課程結束之后,授課老師會留給學員手機和E-mail,免費提供半年的課程技術支持，以便保證培訓后的繼續消化；
      ☆3、合格的學員可享受免費推薦就業機會。
      ☆4、合格學員免費頒發相關工程師等資格證書，提升您的職業資質。

Introduction

Understanding Real-Time Operating Systems (RTOS)

Learning the Concept of Multitasking in Embedded Systems

Overview of the FreeRTOS Kernel

Overview of the STM32 MCU Board

Setting Up the Development Environment

Downloading and Installing All Required Software
Setting Up the STM32 Firmware and Hardware
Understanding Task Management in RTOS

Understanding Stack Memory and Task Stack Size
Creating Your First Tasks
Using Task Parameters
Implementing Task Priorities
Exploring Task States
Implementing Delays
Using the Idle Task Hook
Deleting Tasks
Communicating Between Tasks

Managing Queues
Overview of Queues
Using a Queue
Managing Interrupts (Semaphores)
Overview of Interrupts and Semaphores
Writing an Interrupt Handler on FreeRTOS
Using Semaphores to Synchronize Tasks with Interrupts
Queuing within an Interrupt Service Routine
Managing Resources

Using Mutexes
Using Binary Semaphores
Using Counting Semaphores
Managing Memory and Time

Learning the Internals of FreeRTOS

Debugging and Performance Tools
Kernel Internals
Creating a Blinking Board Using FreeRTOS

Learning the GPIO pins on STM32
Using Tasks to Blink an On-Board LED
Turning the LED On/Off Using Queueing
Turning the LED On/Off Using Interrupts
Troubleshooting

Closing Remarks