1、培訓過程中，如有部分內容理解不透或消化不好，可免費在以后培訓班中重聽；
        2、培訓結束后,授課老師留給學員聯系方式,保障培訓效果,免費提供課后技術支持。
        3、培訓合格學員可享受免費推薦就業機會。

第一階段

高速PCB設計中的理論基礎

傳輸線理論、信號完整性（反射、串擾、過沖、地彈、振鈴等）、電磁兼容性和時序匹配等等。

2 SPECCTRAQuest設計流程

2.1 Pre-Placement

2.2 Board Setup Requirements for Extracting and Applying Topologies

2.3 Database Setup Advisor

—Cross-Section

—DC Nets

—DC Voltages

—Device Setup . ??—SI Models

—SI Audit

3 拓撲結構的抽取與仿真 Extracting and Simulating Topologies

3.1 Pre-Route Extraction Setup—Default Model Selection.

3.2 Pre-Route Extraction Setup—Unrouted Interconnect

3.3 Pre-Route Template Extraction

3.4 SQ Signal Explorer Expert

3.5 Analysis Preferences

3.6 SigWave

3.7 Delay Measurements

第二階段

4 確定和施加約束 Determining and Adding ConstraintsSolution

4.1 Solution SpaceAnalysis: Step 1 to 6

4.2 Parametric Sweeps.

4.3 Constraints :

Topology Template Constraints

Switch/Settle Constraints

Assigning the Prop Delay Constraints

Impedance Constraint

Relative Propagation Delay Constraint

Diff Pair Constraints

Max Parallel Constraint

Wiring Constraint

User-Defined Constraint

Signal Integrity Constraints

4.4 Usage of Constraints Defined in Topology Template

5 模板應用和基于約束的布局

Template Applications and Constraint-Driven Placement

5.1 Creating a Topology

5.2 Wiring the Topology

5.3 TLines and Trace Models

5.4 Coupled Traces

5.5 RLGC Matrix of Coupled Trace Models

5.6 Crosstalk Simulation in SQ Signal Explorer Expert

5.7 Simulating with Coupled-Trace Models

5.8 Sweep Simulation Results with Coupled-Trace Models

5.9 Extracting a Topology Using the Constraint Manager

5.10 Electrical Constraint Set

5.11 Applying Electrical CSet

5.12 Worksheet Analysis

5.13 Spacing and Physical Rule Sets

5.14 Electrical Rule Set

第三階段

6 基于約束的布線 Constraint-Driven Routing

6.1 Manual Routing

6.2 Routing with the SPECCTRA Smart Route

6.3 Driving Constraints in Routing

7 布線后的DRC檢查和分析 Post-Route DRC and Analysis

7.1 Post-Route Analysis

7.2 SigNoise

7.3 Reflection Simulation

7.4 Reflection Waveform Analysis

7.5 Comprehensive Simulation

7.6 Crosstalk Simulation

7.7 Crosstalk Analysis

7.8 Simultaneous Switching Noise Simulation

7.9 SSN Waveform Analysis

7.10 System-Level Analysis

7.11 A Complete Design Link

7.12 Initialize Design Link

8 差分信號設計 Differential Pair Design Exploration

8.1 Types of Differential Pairs in SPECCTRAQuest

8.2 Create Differential Pair Using SPECCTRAQuest

8.3 Create Differential Pair Using Constraint Manager

8.4 Assigning Differential Pair Signal Models

8.5 Preference to Extract Unrouted Differential Pair Topology

8.6 Extracting Unrouted Differential Pair Topology

8.7 Custom Stimulus to Analyze Differential Pair Topology

8.8 Differential Pair Topology Analysis

8.9 Coupled Trace Model and Differential Pair Topology

8.10 Layout Cross-section Editor

8.11 Differential Pair Constraints

8.12 Differential Pair Constraints in the Constraint Manager

8.13 Differential Pair Analysis in the Constraint Manager

8.14 Post Route Extraction

9 時序仿真和和PI仿真

9.1 時序仿真

9.2 PI仿真

第四階段

10. 多板仿真和Design Link模型

10.1 Design Link模型的創建和修改

10.2 主板和子板，底板和核心板的接口信息的查找和顯示

10.3 多板仿真建模

10.4 多板仿真主板和子板資源添加和接口連接

10.5 網絡列表創建

10.6 仿真參數設置

10.7 探測仿真

11. SI仿真環境的建立和時序仿真－－DDR3和Flash,高速數據線的時序控制

11.1 SI仿真模型的查找技巧和IBIS格式轉換

11.2 仿真環境的設置和仿真模型分配和審核

11.3 DDR3和Flash,高速數據線時序仿真在項目開發中作用和意義

11.4 時序控制的公式推導和理論基礎

11.5 對應 Setup Time和 Hold Time 公式的深入理解

11.6 公式參數在芯片datasheet中的查找

11.7 時序仿真的高速數據線等網絡組的創建和拓撲提取

11.8 時序仿真的激勵

11.9 時序仿真類型

11.10 時序仿真結果查看

11.11 時序仿真的約束

11.12 SigXplore和Constraint Manager

11.13 設計規則應用和規則驅動布局

12. 差分仿真

12.1 差分線仿真模型

12.2 差分線定義

12.3 差分線仿真設計技巧

12.4 如何在Constraint Manager中識別和查找差分對

12.5 如何建立差分對

12.5 差分對拓撲提取和仿真

12.6 SigXplore中差分線約束

12.7 差分約束更新到約束管理器

13.PI電源完整性仿真

13.1 電源平面對的耦合和去耦

13.2 電源仿真的環境搭建

13.3 阻抗控制和層疊結構設計

13.4 電源平面對構建中各種復雜情況的考慮和處理原則

13.5 PI電源完整性仿真參數設置

13.5 EMI/EMI 處理

13.6 電壓調節模塊和噪聲源

13.7 仿真中電容的選取

13.8 多節點仿真

13.9 波形圖的處理

14. 后仿真－布線后分析

14.1 反射仿真

14.2 串擾仿真

14.3 同步開關噪聲仿真

14.4 寄生仿真

14.5 EMI仿真

14.6 振鈴仿真

15. 自動和手動布線的技巧

15.1 自動布線技巧

15.2 手動布線技巧